高压CO2泡沫压裂钻孔瓦斯渗流机理及方程改进

Mechanisms and equation improvement for gas seepage in coal seams around boreholes subjected to high-pressure CO2 foam fracturing

  • 摘要:
    目的 为解决高瓦斯煤层特殊低孔渗结构限制瓦斯抽采效率的问题,精准测定CO2泡沫压裂钻孔孔周“环状”破裂煤体的渗透参数,提高煤层瓦斯预抽钻孔设计的准确性和瓦斯抽采效率。
    方法 采用自主设计的孔周破碎煤体渗流试验仪器,从不同初始孔隙结构的角度,对钻孔周围“环状”孔隙、裂隙的煤体进行研究。测试不同初始孔隙结构试样的渗透率,分析孔周破裂煤体渗透率的演变特征。基于改进的Ergun方程,得到破裂煤体介质瓦斯渗流基本方程,并对其合理性进行验证。
    结果 对于孔周“环状”破裂煤体在压实过程中会经历三个阶段的破碎变形过程。当应力在1.2~1.3 kPa时,即颗粒变形后期,破碎量明显减少。这是由于颗粒变形后期之前阶段产生的细小颗粒已填充了大部分孔隙。在外部载荷的作用下,煤体颗粒会经历进一步的压缩变形,最终导致颗粒之间相互压缩,形成一个致密的整体。随着流速的持续增加,流动过程主要受惯性力作用,通过将方程中的二次项系数中的参数设置成与流动状态相关的变量,得到a/bv基本上符合负指数关系。改进型Ergun公式克服了传统公式的缺陷,能够较好地预测不同孔隙率、不同颗粒直径以及不同流速时孔隙介质渗流过程中的负压损失。
    结论 在煤层瓦斯预抽工作中,通过运用改进后的破裂煤体瓦斯渗流方程,可以计算瓦斯预抽钻孔孔周的“环状”破碎煤体渗透率,进而可以准确给出有效致裂半径,为优化设计瓦斯抽采钻孔布孔方式提供了重要的理论基础,并为高瓦斯低透煤层绿色高效抽采提供新思路和新方法。

     

    Abstract:
    Objective The special low-porosity, low-permeability structures of high-gas-content coal seams restrict efficient gas drainage. To address this issue, this study accurately determined the seepage parameters of annularly fractured coals around boreholes subjected to CO2 foam fracturing to enhance both the design accuracy of boreholes for gas pre-drainage from coal seams and gas drainage efficiency.
    Methods Using an independently developed apparatus for gas seepage experiments on fractured coals around boreholes, this study investigated the coals with pores and fractures distributed in an annular pattern around boreholes from the perspective of varying initial pore structures. Specifically, this study analyzed the evolutionary characteristics of the permeability of fractured coals around boreholes by testing the permeability of coal specimens with varying initial pore structures. Based on the improved Ergun equation, this study derived the fundamental equation for gas seepage in fractured coal media and verified its rationality.
    Results The results indicate that the annularly fractured coals around boreholes experienced three stages of rupture and deformations during their compaction. When the stress ranged from 1.2 kPa to 1.3 kPa, corresponding to the late deformation stage of particles, the quantity of fractured particles significantly decreased. The reason is that fine-grained particles produced before the late stage of particle deformation filled most of the pores. Under external loading, the coal particles underwent further compression and deformation. As a result, the particles were subjected to mutual compression, forming a dense whole. As the seepage velocity continuously increased, the flow was primarily governed by inertial force. By setting parameters in the quadratic term coefficient in the Ergun equation at a variable associated with the flow state, it can be found that the relationship between the a/b ratio of the Ergun equation and seepage velocity v roughly followed a negative exponential relationship. The improved Ergun equation overcame the limitations of the conventional seepage equation, enabling the effective prediction of the negative pressure loss during seepage in porous media under varying porosities, particle diameters, and flow velocities.
    Conclusions For gas pre-drainage from coal seams, the permeability of annularly fractured coal around boreholes for gas pre-drainage can be calculated using the improved gas seepage equation for fractured coals. Accordingly, the effective fracturing radius can be determined accurately. This study provides an important theoretical basis for optimizing the arrangement of gas drainage boreholes. Meanwhile, it offers a novel approach to green, efficient gas drainage from widely distributed high-gas-content, low-permeability coal seams in China.

     

/

返回文章
返回